Emos AP emGo-U25 Bedienungsanleitung Seite 10

Connection of PC to U25 and the settings
Fig. 6
Click Start - Control panels – Network and Internet – Net-
works and Sharing Centre – Change Adapter Settings" and
right click on "Wireless network connection" and choose
"Connect".
Fig. 7
On the PC desktop in the system part of the panel, left click
on the network wireless connection icon (make sure your
wireless network card is activated).
Fig. 8
From the list of wireless networks choose SSIDU25 and
click "Connect."
Fig. 9
Enter the network password to connect to the wireless net-
work and confirm the connection by clicking the "OK" button.
The default password and SSID network name is written on
the repeater label.
Fig. 10
After checking the password the list will display the icon "Con-
nected", which indicates that the computer has successfully
been connected to the equipment.
Fig. 11
Open the web browser (Internet Explorer, Firefox, Safari,
etc.) and enter http://192.168.10.1 on the address line
(or the Google search line) and push ENTER on the keyboard.
Fig. 12
A new window will appear where you can enter the login
name and password. The default name: admin and default
password: admin. The password for access can be changed
in the web interface in the advanced settings.
Setting of the wireless parameters depends
from the selected operating mode
Router or AP (Access Point) mode
Fig. 13
Click Access Point or Router according to the mode you
wish to choose.
Fig. 14
Choose the name of the SSID in your new wireless network
(default: U25) and password to secure the network. The
password must be at least 8 symbols long.
Fig. 15
Set the WAN connection to Internet. You can choose from
the offer: static IP address, dynamic IP address allocated
by the DHCP server or PPPoE Dial-Up. If you are not sure,
choose DHCP. After the setting, click the icon "Save/Apply"
to store the settings.
Repeater
Fig. 15 - 17
Click the icon Repeater, or Repeater WISP (Fig. 12) to
choose the repeater mode and then click the icon "Site Survey"
to find any available networks around. In the "Select" column
click the line of the desired SSID network. In the field Pre-
Shared Key: enter the password to connect to the chosen
WiFi network (the same password is for access to the extended
network with the help of the repeater). After the setting, click
the icon "Save/Apply" to store the setting.
Repeater WISP
The same setting as in the repeater.
Client mode
Click the icon Client or Client WISP (Fig. 12) to chose the Client
mode or WISP Client mode and then click "Site Survey" icon to
find all available networks around. In the "Select" column
click the line of the desired SSID network. In the field Pre-
Shared Key: enter the password to connect to the chosen
WiFi network. After the setting, click the icon "Save/Apply"
to store the setting. After setting the U25 to the Client mode,
disconnect it from PC and connect to the multimedia appli-
ance. The setting will remain and the multimedia appliance
will be connected automatically.
Wisp client
The setting is the same as the client.
Fig. 18 – 19
Equipment reset and restoration of the defaults
Activate U25 and leave it on. Hold the reset button on the side
of the appliance for at least 5 seconds until the blue indicator
diode goes dark for moment. All settings will be deleted and
factory defaults will be restored.
• To see more advanced setting options click the icon
"Advanced".
10