Renkforce AC750 Bedienungsanleitung Seite 5

Repeater quick set-up via WPS
Please note that the slide switch for selecting the operating mode (6) must be in the
your wireless router. At the end, an abbreviation is appended to the WLAN name so
that you can distinguish between the WLAN of your router and the repeater.
•
more than 6 seconds.
rapidly.
• Press the WPS button on your wireless router within 2 minutes. Alternatively, launch the
WPS function on the router's web interface.
Refer to the operating manual of your router.
•
strength will be indicated by the 3 WiFi LEDs.
• To connect a device via Wi-Fi, select your Wi-Fi with the appended abbreviation. The WLAN
password is identical to the WLAN of your router.
Devices can now also be connected to the two network ports.
Overview of operating modes and access to the web interface
a) Repeater mode
•
interface (change password, set time) (chapter Login on the web interface (all modes)). The
product will then be ready for use.
•
• In either case, connect a computer or mobile device to the wireless network or one of the
WLAN will be identical to that of your router, otherwise the WLAN is unencrypted.
•
192.168.10.1 .
please restart your computer and the repeater (switch off and on). Alternatively, open the
web interface via the IP address. Since the repeater is already integrated in your network,
you can look up the IP address on your wireless router. Refer to the manual of your router.
b) Access point mode
• If the access point is correctly connected to your router, it should generally be ready for use.
• Connect a computer or mobile device to the WLAN or LAN port of the AP.
•
If the page is not displayed, open it via the IP address. Since the access point is already
integrated in your network, you can look up the IP address on your wireless router. Refer to
the manual of your router.
c) Router mode
• Connect a computer or mobile device to the WLAN or LAN port of the router.
•
the default IP address 192.168.10.1.
•
d) Login on the web interface (all modes)
• First select the desired language and wait until the page is reloaded.
• Enter the user name admin
• Enter the default password admin
(2) on the repeater for
page http: //ap.setup of the repeater.
page http: //ap.setup of the AP.
http: //ap.setup or
Login on the web interface (all modes)
• If, after logging in to the web interface, a pop-up window will appear telling you to change
the password, click OK
cogwheel to change the default password.
The user name is automatically selected. Enter your new password for the web interface in
Then log in to the web interface once more.
•
settings.
The easiest is to set the clock automatically via the Internet.
one of the NTP servers (lower drop-down menu).
course you can always change the other settings at a later stage.
default password as login password, use your newly assigned password.
•
corner to start the set-up.
• If desired, change the two names of the Wi-Fi networks (2.4 and 5 GHz).
• Now choose an encryption for the WLAN. We recommend selecting the standard
WPA2-PSK, as this offers the highest security. If you have devices that only support WPA,
select both standards.
• Enter a password for the WLAN. It should consist of at least 8 characters as well as upper
and lower case letters.
•
is complete.
-
device to the new WLAN network.
If you still want to change other settings, simply log in again on the web interface.
•
corner to start the set-up.
• Select the type of your Internet access above. For example, if you have a DSL connection
and access data, select PPPoE here.
•
• Then, if desired, change the two names of the Wi-Fi networks (2.4 and 5 GHz).
• Now choose an encryption for the WLAN in the lower menu. We recommend selecting the
standard WPA2-PSK, as this offers the highest security. If you have devices that only sup-
port WPA, select both standards.
• Enter a password for the WLAN. It should consist of at least 8 characters as well as upper
and lower case letters.
•
is complete.
device to the new WLAN network.
If you still want to change other settings, simply log in again on the web interface.
-