Ricoh Pro 8300S Bedienungsanleitung Seite 9

WARNING
• If the machine behaves unusually as follows, turn off the power immediately.
After turning off the power, make sure to disconnect the power cord plug from
the wall outlet, and then contact your service representative and report the
problem. Continuously using the power cord can result in fire or electric shock.
• The machine is emitting smoke
• The machine is emitting odors
• Metal objects or other foreign objects have fallen inside the machine
• Water or other fluids have fallen inside the machine
Requirements for Relocating Machines
CAUTION
• When moving the machine, do not hold the control panel. Doing so may
damage the control panel and can result in injury or malfunction.
• When carrying or moving the machine by lifting it for relocation to another
floor, contact your service representative. Dropping or toppling the machine
can result in injury or malfunction.
• After moving the machine, use the caster fixture to fix it in place. Otherwise,
the machine might move or topple over to cause injury.
• When moving the machine, make sure to unplug the power cord from the wall
outlet and confirm that line cords and other connecting cables have been
removed. Otherwise, the power cord is damaged, possibly resulting in fire
or electric shock.
Requirements for Using the Machine
CAUTION
• Do not look into the light source. Doing so may damage your eyes.
• When lowering the ADF, do not place your hands on the hinges and exposure
glass. Your hands or fingers are caught, which can result in injury.
• Keep your hands clear of the paper output slot of the finisher booklet tray
when pulling it out or pushing it in the finisher's staple unit. You may trap your
fingers in the machine's gap and injury can result.
• Install or remove options after disconnecting the power cord plugs from
the wall outlet and confirming that the main unit is not hotter than the room
temperature. Otherwise, you will be burned.
Requirements for Handling the Machine's Interior
WARNING
• Do not remove any covers or screws other than those explicitly mentioned in
this manual. There are high voltage components inside the machine that can
cause electric shock. Also there are laser components inside the machine
that can cause blindness. Contact your sales or service representative if any
of the machine's internal components require maintenance, adjustment, or
repair.
• Do not disassemble or modify this machine. Doing so can result in fire and
electric shock. Also, exposure to the laser components inside this machine
risks blindness.
CAUTION
• There are highly-heated parts inside the machine. When removing misfed
paper, do not touch areas other than those specified in this manual. Touching
those areas can result in burns.
• Although the machine is designed so that a safety device protects users from
injury, take care not to touch the rollers during operation. The rollers may
pinch before stopping completely.
1. Safety Information for This Machine
5