Panlux SL5002 Gebrauchsanweisung Seite 3

Instructions
Electronic IR Sensor Switch
Model: SL5002
Before using or instalation of this product, read the manual and follow all its Safery Rules and Operating
Instructions or let the qualified company mount this controller with sensor detector.
Thank you for choosing the item of company PANLUX s.r.o.
Technical datas:
Input: 230V~50Hz
Max. load power: 250VA
Sensor input: 2m sensor cable with IR sensor
Max. sensor distance: 5 - 10cm
Instalation:
Drill a hole of diameter 13mm at desired position.
Mount the IR sensor (see pic.) and connect to the
switch controller. Make sure that the sensor
detector is well placed and connect the switch to
mains supply.
ATTENTION: dissconnect the item from main supply
during instalation or any manipulation.
Function:
The IR sensor reacts on short approaches of object or human hands. The IR sensor controller switches on
when it detects within its detecting range and switches off when it detects within its detecting range
again. For example, if the sensor is installed into the cupboard, the light turn on while the door of
cupboard opened and switches off while closed.
Keep IR sensor detector clean and away from any waving objects within detection area to avoid the
unwanted action.
Input
Output
Sensor
If the item is mechanically damaged, the assurance cannot be allowed.