Hifonics Titan Series Bedienungsanleitung Seite 7

TWEETER LEVEL ADJUSTMENT OF THE CROSSOVER
The TITAN TS crossovers offer the opportunity to match the tweeter level of the loudspeaker system with
the characteristics of the interior enviroment and the complete soundsystem. You find the slide switch benath
the acrylic cover on the left center.
• To adjust the tweeter level set the 3-way slide switch to the following positions:
"+ 3dB" (high level), "0dB" (mid level) and "–3dB" (low level)
TWEETER LEVEL
SLIDE SWITCH
INSTALLATION OF THE CROSSOVER
Under specific circumstances it will be necessary to mount the crossover to the vehicle. To use the designated
mounting holes, which you find on each corner of the crossover. Use appropiate screws, depending on the
surface, where the housing will be installed on.
MOUNTING
HOLES
INPUT WOOFER TWEETER
– + – + – +
INPUT WOOFER TWEETER
– + – + – +
ENGLISH