Commissioning And Operation - Olsberg 43/1481.9220 Anleitung

Commissioning and operation

Settings on the pellet stove
Information „GSM Module"
Display Action
menu select
or
operation mode
settings
information
information
Ver. 1.00.35 L6
service 2000h
op.hours 0h
or
ext.req. on
GSM mod. Ok
error messages
operating data
service level
Settings „GSM Module"
Display Action
menu select
or
operation mode
settings
information
settings
timer
date & time
language
convect. n.c.
or
frost pro ---
night set ---
max. power 5
standby off
temp drop 2°C
delay ---
GSM mod. set
10
Description
Request the current status of the GSM module via
the menu selection "information".
The following states of the GSM module will be dis-
played:
­ n.c.: The GSM module is not plugged in and is
viewed as "not connected".
­ Init: The GSM module has been detected and is in-
itialised.
­ Ok: The GSM module is operational. SMS can be
received.
- err: An error is present. Possible causes are con-
nection errors, SIM card not inserted or insuffi-
cient credit.
The other settings are only possible if the GSM mod-
ule has been detected as "Ok".
Description
Make the settings for the GSM module via the menu
selection "settings".
Select "set" with ↓ or ↑ and confirm with (ENTER).
Display Action
GSM module
code: 0 0 0 0
or
feedback no
send err. no
GSM module
code: 5 6 7 8
or
feedback no
send err. no
GSM module
code: 5 6 7 8
or
feedback yes
send err. no
Attention:
If, in spite of the pre-sets "feedback" and "send err." on "yes" you do not receive any SMS's from the stove, check
whether credit is still available on the SIM card of the GSM module.
Description
To ensure the necessary safety of the stove and to
avoid undesired operation by third parties, a 4-dig-
it security code must be stored in the GSM module,
and in the "settings" menu of the app. The security
code can be freely selected.
Select each of the 4 digits of the code with (ENTER)
(the value flashes), set the value with ↓ or ↑ and con-
firm with (ENTER) (sample code: 5678).
If the stove should send a feedback to the received
SMS (can entail costs), the display must be changed
to "yes".
„Select „no" with (ENTER) ("no" flashes) and with ↓
or ↑ change over to „yes".
Confirm "yes" with (ENTER).
If the stove should send an SMS when error messag-
es occur, the display "send err." must be changed to
"yes".
„Select „no" with (ENTER) ("no" flashes) and with ↓
or ↑ change over to „yes".
Confirm "yes" with (ENTER).
Attention:
You can only receive an SMS when error messag-
es occur, if you have stored your mobile phone num-
ber in the app.
11