Specification - Somogyi Elektronic Home HPW 30 Bedienungsanleitung

General use
Using the device as a traditional headphone, it is ideal for various audio systems, improving your
well-being due to the wireless design.
In order to be able to listen to music, first connect the device to the audio system using the 3.5 mm jack
plug located on the transmitter unit (figure 1), if it can be done only with RCA connector, then use the
supplied RCA – 3.5 mm jack socket converter.
After you have connected the transmitter unit, turn it on using the ON/OFF button (2). Extend its aerial (1), so the
device is able to transfer the signals of the audio system.
Turn on the receiver unit (headphone) using the ON/OFF button (5), and then extend its aerial (4). Proceed similarly as in
case of radio station searching, press the Reset button (8), and using the SCAN button (9) search until you find the music
being played on the audio system. This frequency is located at the beginning of the frequency range namely at 85.5 MHz, so
you will possibly find it among the first scans, depending on how many radio stations can be received below this frequency. If the
reception is not perfect (cross-talk appears, the transmission is disturbed by a radio station), then you have the option of selecting
another channel, which is located at 86.0 MHz.
You can change between the two channels using the channel selector buttons F1, F2 (3).
F1 selects 85.5 MHz, and F2 select 86.0 MHz for the data transmission. Use the channel which ensures the best possible reception for the
sound transmission.
Figure 1
Warnings
Make sure that no object or liquid can get into the device through the openings!
Be cautious, do not drop the device. Do not use it when it is damaged!
Never try to disassemble the device, entrust its repair to an expert!
Do not operate it near children without supervision!
Use it only in dry conditions!
Protect it from dust, vapour, solar radiation and direct thermal radiation!
It may be cleaned with dry wipe, do not use aggressive detergents!
Keep in mind that for the sake of good radio link the devices should be kept in undisturbed location, away from metal surfaces.

Specification

Range in an open field ..............................................................................................30 m
Power ...................................................................................................................100 mW
Impedance .....................................................................................................32 Ω ± 15%
Frequency response of the headphone .....................................................20 - 20.000 Hz
Sensitivity ...................................................................................................105 dB ± 2 dB
FM SCAN Radio receiver ...................................................................FM: 88 to 108 MHz
Communication frequency of the transmitter unit ........................................F1: 85.5 MHz
..................................................................................................................... F2: 86.0 MHz
Connection cable of the transmitter unit, length .....................................3.5 mm jack, 1 m
Accessory converter cable, length ...............RCA – 3.5 mm jack socket converter, 40 cm
Power supply ................................transmitter unit: 2 x AAA [1,5 V] battery (not included)
...........................................................receiver unit: 2 x AAA [1,5 V] battery (not included)