Grouw! 50799 Gebrauchsanweisung Seite 58

Overview
1. Removable support rail
2. Cradle
3. Motor
4. Inner screen
5. Outer screen
6. Leg
7. Spanners (2)
8. On/off button
9. Adjustable length stop
10. Movable plate
11. Lock knob
12. Screen over cradle
58
Sawing
Note! The saw requires a connection to a
plug with a 16-Ampere fuse.
If an extension lead is used, the lead must
have a 2.5 mm 2 cross-section and be fully
uncoiled before use. Make sure that the cord
will not be squeezed or come into contact
with the saw during work.
Plug the in.
Place the workpiece to be cut in the cradle so
the part to be sawed is in line with the blade.
If necessary, use the length stop so that all
the logs are sawn to the same length.