Grouw! 50799 Gebrauchsanweisung Seite 57

Step 13
Fit the two knobs for tightening the
adjustable support rail (C) and the length
stop (J).
Step 14
Remove the rod and place the spring over it.
Attach the rod to the legs on the frame (A)
and the cradle (B). Tighten it.
Press the cradle in towards the frame several
times to check that the spring on the rod
automatically presses the cradle back to its
original position again.
Step 15
Fit the plug and emergency stop to the
motor plate using 4 bolts (M4×55).
GB
57