Tc Control Panel Functions - elco VECTRON L 05.700 DUO Betriebsanleitung

Overview
TC Control
Panel Functions
TC
TC control panel
All control elements are visible from the
exterior of the device. A removable,
transparent cover, secured by means of
clips to the burner hood, facilitates
access to the individual operating and
control elements.
Moreover, the TC control panel is
provided with a safety of protection of
the power circuit.
To detach the lid, press slightly to one
side, or on both sides at the located
sites xv, and remove simultaneously.
To replace the lid, place the 2 clips in
front of their corresponding orifices
and press.
20 04/2005 - Art. Nr. 13 018 100A
Functions of the TC Control Panel
A2 Standard 48x48 mm or 48x96
mm plug-in slot for performance
control (optional).
A4 Mounting location for a display
(optional).
F10 Fuse of TC
Three positions switch
S1 Main switch of TC
0 Off
1 On
One green control light H10
is illuminated
S2 Auto operating mode selector
switch
Automatic operation
K
Manual operation
S5 Display on the control panel:
- fault (red control light H6
is illuminated)
- pressure switch for release of
the control unit.
S7 Connection to S29J - S2K step
selector switch
1 Ignition throughput and stage 1
2 Rated throughput and stage 2
Burner remains in the operating
stage selected.
S29 Selection of operating location
Local operation
Remote operation
H
(optional)