Pentair Water INTELLIBRITE 5g POOL LIGHT Bedienungsanleitung Seite 11

underwater light. This screw mounts and electrically grounds the housing
securely to the mounting ring and wet niche. Failure to use the screw
provided could create an electrical hazard which could result in death or
serious injury to pool users, installers or others due to electrical shock.
6. Fill the pool/spa until the underwater light is completely submerged in water
before operating the light for more than ten (10) seconds.
7. Final check for proper light operation: To check for proper operation,
switch on the main switch or circuit breaker, and the switch that operates the
IntelliBrite underwater light itself. The light should illuminate when power is
applied. If not recheck the installation steps starting with Step 1
Use only the special pilot screw provided with this
11 11