Bushnell Trophy Bedienungsanleitung Seite 5

EYEpIEcE FocuSING
The eyepiece is designed to provide a precise fast focus. The eyepiece will focus faster than your
eye can compensate for any inaccuracy in your adjustment.
Look at a distant object for several seconds without using your scope. Then, shift your vision
quickly, looking through the scope at a plain background. Turn the fast-focus eyepiece clockwise or
counter clockwise to adjust to your eyes. The reticle pattern should be sharp and clear before your
eye can refocus. After you have made your adjustment, with a quick glance re-check the image.
WARNING: NEVER LOOK AT THE SUN THROUGH THE RIFLESCOPE (OR ANY OTHER
OPTICAL INSTRUMENT). IT MAY PERMANENTLY DAMAGE YOUR EYES.
cENtErING tHE rEtIcLE
The reticle was carefully set at the optical center of your riflescope at our factory. This setting
provides you with the ideal adjustment range from the center position. The riflescope's adjustments
are used to zero-in the riflescope.
It is wise to check the center of the optical axis before mounting. Do this by placing the scope in a
solid V-block (cardboard box with two slots). While looking through the scope in a normal viewing
position, carefully rotate the scope. If the target moves in a circle larger than 1" from center (at 25
yards) in relation to intersection of crosshairs, reset windage and elevation adjustments. Remove
adjustment caps. Set each adjustment to midpoint and recheck for centering. If target still rotates,
use adjustments to correct.
MouNtING
To achieve the best accuracy from your rifle, your Bushnell scope must be mounted properly.
5