VOSKER V200 LTE Schnellstartanleitung Seite 4

FINDING THE SIM ID
CHARGING THE INTERNAL BATTERY
Charge the camera for 24-48 hours before use. While charging, make
sure the camera is turned off and the solar panel is facing down so it
does not interfere with the USB charging process.
Plug the 12V-USB cable from the 12V port at the bottom of the came-
ra and connect it to a USB port. Once plugged, the screen will turn on
and it will show the charging battery level for 10 seconds. Press the
OK button once more to see the battery level reappear.
FINDING THE SIM ID
The SIM ID number is on the screen of the camera. When you turn on
the camera the first time, you will have to choose the language. Then
in the menu, using the arrow buttons and the OK button to make the
selection, you must follow the following path; Settings, General,
About the device, SIM barcode.
The SIM ID number will be displayed on the screen and you can then
scan it using the VOSKER app. You will need this number to complete
the registration of the V200 camera and log in to the application.
4