Kunzle & Tasin Bona Capricorn Bedienungsanleitung Seite 10

Commencing Operation (Cont.)
5.
Close the belt guard and
tighten the knob.
Excessive belt tension may cause the premature failure of the ball bearings.
The drum belt must have a 10.5mm stretch with a center load of 30 N ± 3 N.
Belt tension can be adjusted using the screw.
The vacuum cleaner belt must have a 8mm stretch with a center load of 18 N ± 2 N.
The belt tension can be adjusted using the belt tightener.
Using the machine when not fully assembled may cause injury or damage to people or objects.
DO NOT use the machine when it is not fully assembled. Keep all fittings tightly closed. Maintain
machine settings in accordance with the specifications.
7.
Insert the suction pipe (B)
into its housing and tighten
the handle (A).
10.
10 10
6.
Pull the belt tightener (A).
8.
Insert the bar (A) into the cylinder (B) and lower the tube (C).
Connect the power supply
cable to the machine and
power supply.
Bona Capricorn Manual
9.
Lift the drum with the lever (A).