Nannio FollowMe Bedienungsanleitung Seite 14

2
.5 Volume Setting
1. Press the volume setup button
2. Press up
button
2
Talkback Function
.6
Press the talkback button
will then be displayed on the screen (See Fig. 10)
2
Lullaby Function
.7
There are three lullabies can be selected to play on camera unit for your baby.
1. Press the music button
2. Press the music button
3
Menu Options
1. Press the menu button
the screen(See Fig. 12).
2. Use the left
3. Press the Zoom/OK
4. The main menu contains 7 submenus.
3
.1 Camera Selection ( Camera Select )
In this submenu you can select between multiple cameras if the cameras have
been paired. Also, you can tap the auto-scan icon
auto-scan feature will display images from each camera in eight-second
intervals (See Fig. 13).
3
.2 Feed Timer Setting ( Feed Timer )
In this submenu you can set up feed timer to remind you the timing(See Fig.
14).
3
.3
Temperature Setting ( Temp. Setting )
1. In this submenu you can choose the temperature unit between degrees
Celsius or degrees Fahrenheit (See Fig. 15).
2. You can set the temperature range of the temperature alert. If you select

On" to enable the temperature alert and the temperature is outside
the range, a warning sound will be emitted from the monitor unit (See Fig. 15).
3
.4
Camera Setting ( Camera Setting )
The system comes with a camera unit that has already been paired with the
monitor unit. The
channel on the monitor unit. This is necessary for configuring additional
4
camera units.
or down buttons to adjust volume level, and then press ok
to confirm the setting (SeeFig. 9).
to speak through the camera unit, and the
, the camera will play music (See Fig. 11).
again, the camera will play the next song.
on the monitor unit to display the main menu on
and right
button to confirm a setting.
"Cam Setting" function gives each baby unit a separate


to enter volume setup. See Fig. 9.
.
buttons to navigate through the menu.
for auto-scan function.
An
icon
"Alert