Nannio FollowMe Bedienungsanleitung Seite 13

Using AC Power
1. Plug one end of the provided power adapter into a wall outlet and the other end
into the monitor (See Fig. 5).
Note : Use the adapter labeled OUTPUT: 6V DC with the monitor.
2. Press the POWER/VOX button
monitor on (See Fig. 5).
Note 1: When power on the monitor, "Power" LED will light up (green light).
Note 2: "Out of Range" will be displayed on the LCD screen if the monitor
Note 3: Press the POWER/VOX button and keep it around 3 seconds to turn off
2
Monitor Remote Control Function
.2
The monitor can control the movement of the camera. The camera head has the
ability to rotate up, down, right and left. Press the up
on monitor to move the camera up or down. Press the left
on monitor to move the camera left or to the right (See Fig. 6).
Note 1: Besides manual camera movement, the camera can also track moving
Note 2: The audio will be muted when the motor rotates.
2
Zoom in Function
.3
Press the Zoom/OK button
again to change back to normal view (See Fig. 7).
Note : When the zoom in function is enabled, auto tracking will be disabled until
the user zooms out.
2
VOX ( Voice-Operated Transmission) Function
.4
1. Press and hold the POWER/VOX button
monitor unit to enable the VOX function. This will turn the screen OFF but the
VOX LED
function is enabled. Please (see Fig. 8).
2. When the sound from the camera reaches the setting level (See Fig. 18), the
screen will turn ON automatically. It will turn OFF again after 30 seconds. If
the sound from the camera still reaches the setting level during the 30 seconds,
it will extend 30 seconds to turn OFF the screen from the last voice event.
exceeds the range (unlink).
the monitor.
objects by using the auto tracking function. Auto tracking can be
enabled or disabled in the menu.
will remain ON (green) to remind the user that the VOX
and keep it around 3 seconds to turn the
on monitor once for a 2X zoom of image and press
for less than one second on the
or down buttons
or right buttons
3