Care And Maintenance; Warranty - Celestron 44127 Bedienungsanleitung

CARE AND MAINTENANCE

Your Celestron microscope is a precision optical instrument and should be treated with care at all times. Follow these care and
maintenance suggestions and your microscope will need very little maintenance throughout its lifetime.
• When you are done using your microscope, remove any specimens left on the stage.
• Turn off the top and bottom illuminators when you are done using the microscope.
• If you will not be using your microscope for a long period of time, remove the batteries.
• Always place the dust cap over the eyepiece and the camera sensor when not in use or when being stored.
• Store the microscope in a clean, dry place.
• Be very careful if using your microscope in direct sunlight to prevent damage to the microscope or your eyes.
• When moving your microscope, carry it by the "arm" with one hand.
• Clean the outside surfaces with a moist cloth.
• Never clean optical surfaces with cloth or paper towels as they can scratch optical surfaces easily.
• Blow off dust from optical surfaces with a camel's hair brush or air blower.
• To clean fingerprints off of optical surfaces, use a lens cleaning agent and lens tissue available at most photo outlets and
when cleaning do not rub in circles as this may cause streaks or scratches to occur.
• Never disassemble or clean internal optical surfaces. This should be done by qualified technicians at the factory or other
authorized repair facilities.
• When handling specimen slides, use care as the edges can be sharp.

WARRANTY

Your microscope has a two year limited warranty. Please visit Celestron website for detailed information on all Celestron
microscopes at www.celestron.com.
FCC Statement :This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
© 2014 Celestron. Celestron and Symbol are trademarks of Celestron, LLC. All rights reserved.
Torrance, CA 90503 • Telephone: 1(800) 421-9649
TM & © 2014 Cosmos Studios, Inc. All rights reserved.
This product is designed and intended for use by those 14 years of age and older.
Product design and specifications are subject to change without prior notification.
Made in China | Fabriqué en Chine | Hecho en China | Hergestellt in China | Fabbricato in Cina
4
| ENGLISH