With Manual Control - Fitform Vario Gebrauchsanleitung

3. Users manual electrical
adjustable Fitform-chair
The buttons on the hand control are very sensitive.
Please keep this in mind when storing it in the side
pocket.
3.1. With manual control
Hand control HB1 (M1)
A. Stand up position
Press the red button A, the chair will slowly move to the stand-
up position. The stand-up movement will lift you from the chair,
facilitating easy exit from the chair.
B. Back to sitting position
Pressing red button B will automatically return you to the sitting
position.
NOTE
If your chair has been manufactured with a security button on the
hand control, you will find this grey button with a key printed on it.
Pressed and hold until the light starts to blink (about 10sec), you
have locked the adjustment movements of the chair. Press and
hold again for approximately 10 sec. the light stops to blink and
you have unlocked the security. An extra safety when small children
are around.
40
Hand control HB2 (M2)
A. Footrest in
When the yellow button A is pressed, the footrest will retract.
B. Footrest out
When you press the yellow button B, the footrest will rise. If you want
to raise the footrest even higher , you can use button D for this. This
will slightly recline both the backrest and the seat simultaneously
to ensure that there will be no extra strain on your back. When the
chair is in the stand-up position, the operation of the footrest is
disabled. If the footrest will not elevate, check whether the chair is
completely on the ground (button D).
C. Sit to stand positioning
When the red button C is pressed, the chair will slowly return from
the relax position to the sitting position. If you press and hold the
button the chair will move to the stand-up position and the footrest
will automatically retract, if it was out. This button will help you to a
standing position to exit the chair.
D. Sitting and relaxing position
The red button D will return the chair to the sitting position. When you press and hold the
button, the chair will automatically move on to the relaxing position. Then press button B
to elevate the footrest and you will have the perfect resting position.
NOTE
If your chair has been manufactured with a security button on the hand control, you will
find this grey button with a key printed on it. Pressed and hold until the light starts to
blink (about 10sec), you have locked the adjustment movements of the chair. Press and
hold again for approximately 10 sec. the light stops to blink and you have unlocked the
security. An extra safety when small children are around.
41