UBI EasyCoder 101 Handbuch Seite 5

UBI EasyCoder 101
Cleaning Card
This pre-saturated disposable Thermal Printer Cleaning Card is
designed to safely and effectively remove all dirt, ink, tape,
residue, adhesive and other contaminants from Thermal Print Heads.
This Cleaning card will improve print quality and the life of the
Thermal Print Head.
– Works on all EasyCoder Printers –
Directions
NOTE: For Thermal Transfer Printers, remove ribbon.
• Open pouch and remove EasyCoder Cleaning Card.
• Lift thermal printhead and insert EasyCoder Cleaning Card.
Lower printhead and press FEED or PRINT. If printer returns
an error message, repeat the procedure but press FEED
or PRINT before lowering the printhead. The printer will start
feeding after printhead is lowered.
• Allow a few seconds for EasyCoder Cleaning Card to dry,
then insert dry card for a second time, feed to remove remaining
contamination.
• Remove Cleaning Card and dispose of properly.
RECOMMENDED USAGE:
• Use EasyCoder Cleaning Cards before inserting every roll of label
stock or ticket stock.
SAFE • EASY • EFFECTIVE
Isopropyl Alcohol
PROTECTS YOUR EQUIPMENT
(CH ) CHOH
3 2
CAS 67-63-0
< 60 dB (A)
5