Niko PM-550-20200 Handbuch Seite 30

Follow the instructions in the image.
Maintenance of the outdoor motion detector
Dirt and grime may prevent the outdoor motion detector from functioning properly. Make sure the lens is clean at all times.
Use a damp cloth and water with some detergent to clean the lens. Avoid pressing hard against the lens. Replace the
outdoor motion detector if the lens or other parts of the outdoor motion detector are faulty.
Reading the addresses of several outdoor motion detectors while programming the installation
Switch the light sensitivity of all outdoor motion detectors to the minimum setting before reading the addresses.
To read the address of an outdoor motion detector:
1 Switch the light sensitivity of the outdoor motion detector to the maximum setting and wave your arms in front of the
lens.
2 Switch the light sensitivity to the minimum setting again.
3 Repeat steps 1 and 2 for each outdoor motion detector.
30
Outdoor motion detector
2
180°
Range
3
1