Niko PM-550-20200 Handbuch Seite 29

Selecting the outdoor motion detector settings
Below are the factory settings for the light sensitivity, switch-off delay and detection range of the device:
Light sensitivity
Switch-off delay
Detection range
The potentiometers underneath the cover can be used for changing the settings as follows:
Light sensitivity
Switch-off delay
Detection range
To change these settings, simply open the cover and use a screwdriver to turn each potentiometer to the desired setting.
The sensor can be rotated horizontally within a 25° angle to modify the direction of detection.
If a portion of the detection area is to be excluded from monitoring, cover the sensor lens using the cover cap supplied.
maximum
7 min
14 m
5 lux to infinity
8 s to 30 min
0 to 14 m
25°
Outdoor motion detector
29