Tripod Mounting; Care And Cleaning - Tasco Slokey Bedienungsanleitung

TRIPOD MOUNTING

To attach the binocular to a tripod or monopod, unscrew (counter-clockwise) the cap which covers the threaded socket at the far end
of the center hinge, and set it aside in a safe place. Use a compatible binocular tripod adapter accessory to attach your binocular to
any standard tripod.
WATER MODEL
Your binocular is designed and built utilizing the latest water resistant technology. This model is designed to resist the
penetration of water.

CARE AND CLEANING

Your binocular will provide years of trouble-free service if it receives the normal care you would give any ne optical
instrument.
• tore your binocular with the eyecups up. This avoids excessive stress and wear on the eyecups in the down position.
•
optics.
•
•
•
TO CLEAN YOUR BINOCULAR'S LENSES:
Blow away any dust or debris on the lens (or use a soft lens brush).
To remove ngerprints or other smears, clean with a soft cotton cloth rubbing in a circular motion. A "micro ber"cleaning cloth
(already included in your binoculars) is ideal for the routine cleaning of your optics.
For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning uid or isopropyl alcohol may be
used. Always apply the uid to the cleaning cloth – never directly on the lens.
WARNING: EXCESSIVE RUBBING OR USE OF A COARSE CLOTH MAY CAUSE
PERMANENT DAMAGE TO THE LENS COATINGS.