Neckstrap Attachment - Tasco Slokey Bedienungsanleitung

DIOPTER ADJUSTMENT AND FOCUSING
1. Adjust eyecups interpupillary distance as described in the previous sections.
2. Set the diopter adjustment ring to zero (Fig. 3) and view a distant object.
3. Keep both eyes open at all times.
4.
Using a lens cover or your hand, cover the objective (front) lens of the
of the binocular
5.
Using the center focus wheel, focus on a distant object with ne detail
(e.g., brick wall, tree branches, etc.) until it appears as sharp as possible.
Uncover the objective lens on

NECKSTRAP ATTACHMENT

To securely attach your binocular to the binocular strap:
1. Thread the end of the strap from the bottom up through the strap attachment
loop.
2. Hold the buckle and thread the end of the strap inside the buckle.
3. Adjust the overall length and pull the strap webbing tight so it is secure within
the buckle.
Note: Please do not attach a metal ring directly onto the strap attachment loop if you are
attaching a di erent strap or other after-market accessories. Instead, use nylon zip ties on
the strap loop and attach the accessory to the zip tie.
that has the diopter adjustment ring.
side
Fig. 3
Fig. 4
4