Konig Electronic HAV-MCS50 Anleitung Seite 9

To display ID3 track information:
Press the ST/MO/ID3 button to scroll through the ID3 Text information. If the information
was properly inserted when the files were created, the display will show the "SONG
TITLE", "ARTIST NAME" and "ALBUM NAME". If the album was not properly named,
the display will show "UNKNOWN".
MP3/WMA CD Programmed Playback (On Remote Control Only)
When programming the tracks of a MP3/WMA CD you also have
to select the Directory Number of the tracks being programmed.
You can program up to 40 tracks on a MP3/WMA CD which
is similar to normal discs. In this example the MP3/WMA CD
contains a total of 09 Directories (Albums) and 193 Tracks
(Files). Make sure that when you program your tracks, playback
is paused.
Let's assume that the first track we want to program is track #03
in album #05.
1. Press the Memory/Clock Button on the remote control. The
display shows album 01 and the Program indicator, Track 01
and Program Memory PR"01" will appear in the display.
2. Press the Folder Up Button repeatedly to select album #05.
The display shows track #102, which means the first track of
album #05 is #102.
3. Press the Button repeatedly to select track #05 of album #05
(#107).
4. Press the Memory/Clock Button again to enter Track #107 in
the program Memory.
5. Repeat steps 2 to 4 to program up to 40 tracks. After you have programmed the
desired tracks, press the Play/Pause Button to begin programmed playback.
Inserting and Removing Flash Devices
Flash drives are inserted on the front panel of the unit.
USB
SD/MMC
9