Cleaning And Maintenance; Troubleshooting - Vigan Mammoth VNPW20X Bedienungsanleitung

VACUUMING OF DRY DIRT
Always check that in the vessel there is filter bag, do not work without it, you can damage the vacuum
cleaner. The vacuum cleaner is suitable for vacuuming of coarser impurities like e.g. gravel, clay, sand,
wood shavings, etc.
SOCKET
On the vacuum cleaner there is a socket with grounding contact, to which you can connect a hand-held
power tool with a power of max. 1000 W. Devices with larger input must not be connected. When the
vacuum cleaner is plugged into an electrical outlet and tool is connected, you can turn on the tool.
Vacuum cleaner in this case does not turn on, you have to switch the switch to the position I (on).
For example, you can plug in a grinder and vacuum any waste you make.
BLOWING
This cleaner also has the blowing function. The hose must be put into the air outlet opening. With
this feature you can, for example, blow off the dust from hard to reach places. Switching on and off is
the same as for vacuuming.

CLEANING AND MAINTENANCE

• Open the dust bin.
• Empty the bin.
• Wash dust filter with clean water. The foam filter can be blown through
the air stream and wash well under running water.
• Dry for future use both filters - foam and dust.
• Assemble the vacuum cleaner.

TROUBLESHOOTING

Before due to a problem you call for service, try the following:
Problem: Possible cause :
• The plug is not securely plugged in.
Motor did
• The socket is damaged.
not start:
• The vacuum cleaner is turned off.
• VThe vacuum cleaner is clogged.
Suction
• It is necessary to clean the dust filter.
power
• Dust bin is not in place.
is weak:
• The filter is clogged.
• Remove filter.
Advice:
• Insert the plug firmly.
• Check the socket.
• Turn on the vacuum cleaner.
• Remove the obstacle.
• Clean the dust filter.
• Connect the dust bin back to the vacuum cleaner.
• Clean the filter.
15
str