Invacare XPO110 Batteriezusammenbau-, Anschluss- Und Betriebsanleitung Seite 2

Charging the Supplemental Battery
NOTE: For this procedure, refer to FIGURE 2.
1. Connect the AC or DC power adapter
to the supplemental battery pack.
2. Connect the other end of the AC or DC
power adapter into the appropriate
power source.
NOTE: If completely discharged, the
supplemental battery will fully charge in
approximately 4 hours.
Charging the Internal and Supplemental Battery Pack
Simultaneously
NOTE: For this procedure, refer to FIGURE 3.
1. To charge the supplemental battery
pack and internal battery together,
perform the following:
A. Connect the AC or DC power
adapter to the supplemental battery
pack as shown.
B. Connect the supplemental battery
pack to the XPO
C. Plug the other end of the adapter
into the power source.
NOTE: The internal battery charge status will
be indicated by the XPO
supplemental battery charge will be indicated
by the illuminated lights (bars) located on the
supplemental battery pack assembly.
NOTE: You may operate your XPO
Concentrator while the internal and/or the
supplemental battery is being charged. Use of
the XPO during charging will lengthen the
2
amount of time required to reach full charge
status of the batteries.
Using the XPO ™ Supplemental Battery
2
as shown.
2
battery gauge and the
2
Portable
2
2
Supplemental
Battery Pack
(Power Source)
AC or DC Power Adapter
FIGURE 2 Charging the Supplemental
Battery
Battery Gauge
Supplemental Battery Pack
To Outlet (Power Source)
FIGURE 3 Charging the Internal and
Supplemental Battery Pack Simultaneously
To Outlet
AC or DC
Power
Adapter
Part No 1154327