Operation Instructions - ellemka LMK-500A Bedienungsanleitung

O
PeratiOn
1. Place the clamp on the nail like the diagram below.
2. Insert one finger into rubber hole of the Oximeter fully.
3. Press the switch button once on the front panel.
4. Finger and body should not tremble during measuring.
5. Read the correspondent data from the display screen.
6. Eight display modes.
After turning on the Oximeter, each time you press the power switch, the
Oximeter will switch to another display mode. There are 6 display modes
shown as follows:
1
4
© by ELLEMKA S.à r.l.™
i
nstruCtiOns
2
5
3
6
12