Precautions To Use - ellemka LMK-500A Bedienungsanleitung

P
reCautiOns tO
1. Do not use the pulse oximeter in an MRI or CT environment.
2. Do not use the pulse oximeter in situations where alarms are required.
The device has no alarms.
3. Explosion hazard: Do not use the pulse oximeter in an explosive
atmosphere.
4. The pulse oximeter is intended only as an adjunct in patient
assessment. It must be used in conjunction with other methods of
assessing clinical signs and symptoms.
5. Check the pulse oximeter sensor application site frequently to
determine the position of the sensor and circulation and skin
sensitivity of the patient.
6. Do not stretch the adhesive tape while applying the pulse oximeter
sensor. This may cause inaccurate readings or skin blisters.
7. Carefully read the manual before using.
8. The pulse oximeter has no SpO2 alarms; it is not for continuous
monitoring.
9. Prolonged use or the patient's condition may require changing the
sensor site periodically. Change sensor site and check skin integrity,
circulatory status, and correct alignment at least every 4 hours.
10. Inaccurate measurements may be caused by autoclaving, ethylene
oxide sterilizing, or immersing the sensors in liquid.
11. Significant levels of dysfunctional hemoglobins (such as
9
u
se
© by ELLEMKA S.à r.l.™