OSRAM KREIOS PROFILE 80W WW Handbuch Seite 6

KREIOS ® PROFILE 80W WW
14b
If the display showing the DMX address fl ashes, then one
of the following errors has occurred:
- DMX signal not present
- DMX reception problem
For installations where long distance DMX cable connec-
tions are needed, we suggest to use a DMX terminator.
The DMX terminator is a male XLR 3/5 pin connector with a
120 ohm resistor between pin 2 and 3. The DMX terminator
must be plugged into the last unit (DMX out panel connec-
tor) of the DMX line.
15a
(cable ≥ 3x 2.5 mm
16
6
2)
15b
2
)
2
(cable ≥ 3x 2.5 mm )
17