Werbung
TP037 Early Fun Swing IN9557 -E 07 17.qxp_TP037 Early Fun Swing IN9557 -E 07 17 03/07/2017 15:05 Page 7
1. ASSEMBLY AND SAFETY INFO
TP toys must be assembled by an adult. They must be erected exactly in accordance with the assembly instructions.
Enlisting the aid of a helper will make assembly easier. In order to ensure the correct tensions and to ease assembly, it is
important to assemble the product hand tight to begin with. Only when complete, should the fastenings be fully tightened and
checked. Please ensure that all fastenings are tight before use. We recommend that you place small parts on a tray, or
something similar, to prevent the frustration and disappointment of mislaying them. Please take care during assembly as the
manufacturing process can sometimes result in the occasional sharp edge and small pieces of waste metalwork. Should there be any
missing parts, the toy must not be used until replacement parts have been fitted - contact the TP Customer Services: Email:
directsales@tptoys.com
2. SITING
Under no circumstances should any of our toys be positioned on a hard surface such as concrete or asphalt, unless the ground under the
toy plus the recommended freespace area is covered with a safety surface. Examples of suitable surfaces are grass, sand or a play
surface intended for this use. TP toys should be sited on level ground.
3. USAGE
TP toys are designed and made for use only by children aged between 36 months and 12 years, unless otherwise stated, and must not
be used by anybody else. Misuse can result in injury. "Warning only for Domestic use." For outdoor use only.
4. SUPERVISION
Children should always be supervised while they are playing on TP toys and should be instructed not to use the toy in an inappropriate or
hazardous manner. We recommend that they do not wear loose-fitting clothing or jewellery that may catch or snag during play. Children
should not wear cycle helmets while playing on TP toys.
5. WEATHER CONDITIONS
Special care should be taken as weather conditions change. In particular, outdoor toys can become slippery in wet weather and tongues
and lips can stick to metalwork at subzero temperatures. In warmer and sunnier weather, parts can become hot, and the temperature
should be regularly checked during play, especially metal parts and slides. If there is any doubt over safety then the toys should not be
used. If high wind is expected or forecasted, please ensure that the outdoor toys are either moved to a sheltered position or well secured
to the ground or other immoveable object.
6. WATER PLAY
Many surfaces can become slippery during water play. Extra caution and supervision is required when combining water (e.g. paddling
pools, aqua slides etc.) with other forms of outdoor play.
7. MAINTENANCE.
With all toys it is vital that the equipment is checked regularly and often by an adult. The complete toy should be checked at least once a
month, and particular attention should be paid to connections and fastenings. If any parts exhibit signs of wear and tear, they may need
to be replaced. To replace defective parts in accordance with the manufacturer's instructions. Failure to do this may result in the product
malfunctioning and causing injury. Children must not be allowed to use the toy until properly installed and checked. Galvanised tubular
products may require occasional maintenance. If surface rust appears it should be removed with either a wire brush or coarse
sandpaper, and the area treated with a non-toxic paint.
8. SWING FRAMES
These must always be used with the stakes provided. We recommend that you concrete them in place. Never set the legs of a swing
frame in concrete.
9. SWINGING TOYS
When fitting swinging toys it is vital that moving parts have no metal to metal contact. Children should be instructed not to pass in front of
or behind moving items, not to twist or swing an empty swing seat, and not to get off a swinging toy when it is in motion.
10. ROPES
These ropes will degrade over time. When signs of degradation appear, the toy should be replaced.
11. FIRE RISKS AND DISPOSAL
Never allow TP toys to be placed or used near a fire. When it becomes necessary to dispose of your equipment, remove all bolts and
disassemble. Store out of the reach of children until it can be properly disposed of.
These instructions are issued in the interest of child safety, and we do ask you to follow our advice.
1
INSTRUCTIONS FOR ASSEMBLY, MAINTENANCE AND USE OF TP TOYS
Please read carefully and keep all enclosed information for future reference.
R MATION
7
TP Early Fun Swing
Werbung
