Basic Playback - Pioneer SC-LX57-K Kurzanleitung

Basic playback

Multichannel playback
STANDBY/ON ALL ZONE STBY
DISCRETE ON
RCU SETUP
BDR
BD DVD DVR
TV CD NET
2
USB CBL
iPod SAT MHL
INPUT SELECT STATUS
INPUT
TV CONTROL
CH VOL
AUDIO
PARAMETER
TOP MENU
ENTER
HOME
MENU
iPod CTRL
FEATURES
PHASE P.CTRL+ A.SCAL
MPX BAND
PRESET
AUTO/ALC/
4 DIRECT STANDARD ADV SURR
1 2 3
SIGNAL SEL MCACC CH LEVEL
4 5 6
SPEAKERS DIMMER SLEEP
7 8 9
D.ACCESS HDMI OUT CLASS
/ CLR 0 ENTER
ZONE 2 ZONE 3 HD ZONE
Z2 Z3 HDZ
RECEIVER
6
1
Switch on the playback component.
E.g.) Turn the Blu-ray Disc player connected to the HDMI
BD IN terminal on.
SOURCE
2
Switch the input of the receiver.
E.g.) Press BD to select the BD input.
HDMI
3
ADPT
Press
TUNER 4
Press AUTO/ALC/DIRECT to select 'AUTO
RECEIVER
3
SURROUND'.
VOLUME
For multi-channel playback with a 2-channel audio input
6
(TV, music, etc.), press the STANDARD, ADV SURR or
THX button to select your preferred listening mode.
MUTE
5
Start the playback component's playback.
VIDEO
PARAMETER
E.g.) Start playback of the Blu-ray Disc player.
TOOLS 6
Use VOLUME +/– to adjust the volume level.
MENU
Sound can be switched off by pressing MUTE button.
RETURN
Note
• Switch to one of the underlined devices to use the remote
ECO control to operate that device. To operate the receiver,
PTY
first press
operate.
TUNE
• The receiver's remote control can be used to operate
THX
+Favorite
not only the receiver but also a variety of other devices,
AUDIO
AUTO
S.RTRV including an iPod/USB device, a Blu-ray Disc player, a TV,
DISP
etc.
CH E.g.) Playing a Blu-ray Disc player
CH
LIGHT
to the receiver operation mode.
RECEIVER
, then press the appropriate button to
RECEIVER
BD
Listening to the radio
1
Press TUNER to select the tuner.
If necessary, press BAND to change the band (FM or AM).
2
Press TUNE +/– to tune to a station.
• Press and hold TUNE +/– for about a second. The receiver
will start searching for the next station.
• If you're listening to an FM station but the reception is
weak, press MPX to select FM MONO and set the receiver
to the mono reception mode.
Saving station presets
If you often listen to a particular radio station, it's convenient to
have the receiver store the frequency for easy recall whenever
you want to listen to that station.
1
Press TOOLS while receiving a signal from the
station you want to store.
The preset number is blinking.
2
Press PRESET +/– to select the station preset
you want, then press ENTER.
The preset number stop blinking and the receiver stores
the station.
Listening to station presets
You will need to have some presets stored to do this.
 Press PRESET +/– to select the station preset
you want.