Garant 93 1401 Betriebsanleitung Seite 52

GARANT Workbench with electric height adjustment
230 VAC Output
en
Energy Saver (Threshold)
230 VAC Charging
Operation Status
Current
Maximum Current
12 VDC Output
Operation Status
Current
Jumpstart
Shutdown Delay
12 VDC Charging
Operation Status
Current
General
Battery Status
52
Current operating data at the 230 V-AC output
3. Confirm with OK.
Energy-saving mode (power threshold)
1. Press the OK button.
2. Use the ▲ and ▼ buttons to set the desired power value (between
0 W and 20 W).
3. Confirm with OK.
Current operating data at the 230 V-AC input
Display active (On / Off)
Charging current in Amperes
Maximum charging current
1. Press the OK button.
2. Use the ▲ and ▼ buttons to limit the desired charging current
(between 1 A and 10 A).
3. Confirm with OK.
Current operating data at the 12 V-DC output
Display active (On / Off)
Current in Amperes
Emergency start (this function is not available)
Switch-off delay for the 12 V-DC output after the battery has been
switched off.
1. Press the OK button.
2. Use the ▲ and ▼ buttons to set the desired time (between 1
minute and 10 hours). To deactivate this mode, press the ▼ but-
ton until "inactive" appears.
3. Confirm with OK.
Current operating data at the 12 V-DC input
Display active (On / Off)
Charging current in Amperes
General data for the battery
Current data for the internal battery. This contains other sub-items.
Operation Status
Remaining Operation
Instruction manual
Current flow display (Discharging / Char-
ging)
Remaining time
(negative if discharging, positive if char-
ging)