Gigabyte GHOST Serie Bedienungsanleitung Seite 10

4-5 Sensitivity Tab
Sensitivity
As default setting, there are four sensitivity stages: 810, 1620, 3240, and 6030DPI (dots
per inch). You can set preferred sensitivity value of four sensitivity stages , then you can
switch it on the fly. Check "set X and Y axis separately" option to adjust X-Y sensitivity levels
individually.
On-the-fly sensitivity & Obvious Sensitivity Indicator
If On-The-Fly sensitivity has been assigned, easily flick the On-the-fly "Up-Down"sensitivity
adjust button to cycle through the settings of fore sensitivity stage, and the 4-degree LED
indicator will show the current sensitivity selected. To speed up or slow down depends on your gaming situation.
In first-person shooting games, programming a smaller dpi tracking sensitivity (e.g., 400 dpi) for sniping
and shooting is recommended. Higher setting (e.g.,2000 dpi) for quicker movements.
Report rate
The report rate determines the time intervals that your PC retrieves data from your mouse. You can set the report rate to
125Hz (8ms), 250Hz (4ms), 500Hz (2ms), or 1000Hz (1ms) by moving the knob on the slider.
4-6 Scroll Tab
You can adjust vertical & horizontal scroll wheel speed by moving the knob on the slider.
4-7 Windows Tab
Click the Windows tab link to Window
®
Mouse Control Panel directly.
- 10 -