General Function; Battery Charging - USER’S GUIDE KYGO A4/300 Anleitung

E N G L I S H

General Function

When charging
The RED LED is on when the battery is charging. The RED LED is off when
battery is fully charged.
When using the earphone
The RED and BLUE LEDs blink alternately when the headphone is in
the pairing mode. Standby mode: the BLUE LED flashes rapidly. Music
playback mode: the BLUE LED flashes slowly. The RED LED blinks with
sound alert when the battery has low power.
10
E N G L I S H

Battery charging

The headphone comes with a built in rechargeable battery. Before using
it for the first time we recommend you charge the battery fully. Only use
the supplied micro USB cable to charge the headphone. Please charge
for 3 hours. Connect the micro USB connector of the charging cable into
the micro USB port of the headphone. Connect the other end of the USB
cable to your computer's USB port or to an optional USB wall charger (not
included).
The RED LED is on when the battery is charging. The RED LED is off when
the battery is fully charged.
11