Cleaning - Razorri Rpde260A Benutzerhandbuch

6. CLEANING METHOD
1. Disassemble all the parts, keep aside dry in the open air.
2. Use the cleaning scraper to clean the mixing bowl after it's dry
3. Use the cleaning scraper to clean the mixing axle after it's dry
4. Use the cleaning scraper needles to clean the extruding discs after it's dry
ATTENTION:
Do not clean all the parts immediately after using, put aside in the open air or in
refrigerator around 2 hours, then it will be much easier to clean with cleaning scraper.
17