Rechargeable Battery - Woodley Vision V4002 Bedienungsanleitung

4.0 USInG THe MICROSCOPe
hOlD ThIs
lEvEr AnD
rOTATE IT

5.0 ReCHARGeABLe BATTeRY

The vision v4002 model is equipped with a built-in rechargeable battery.
The battery can be recharged simply by connecting the microscope to the provided external power supply,
using the jack connector on the rear.
During the charging process, you can use the microscope as usual.
In order to speed up the charging of the battery, it's suggested to turn the
Led off when you connect the external power supply.
For a full charge, it's suggested to keep the external power supply connected
to the microscope for at least 8 hours.
Always unplug the external power supply from the microscope, when
not in use.
Page 8