Image Adjust; Maintenance And Warnings - Bpt XTSDI20BV Benutzerhandbuch

MOTION
→ SELECT
→ DISPLAY
• ON
• OFF
→ SENSITIVITY: to adjust sensitivity
PRIVACY (To mask certain areas).
→ ON → OFF
DEFECT
→ LIVE DPC → LEVEL

IMAGE ADJUST

3D NR (Disturbance reduction. The greater the selected level, the lesser the disturbance).
SHARPNESS - BRIGHTNESS - RANGE- BLUE GAIN - RED GAIN - LENS SHADING - NTSC/PAL
RESET
To return to default parameters.

MAINTENANCE AND WARNINGS

Do not try to disassemble the videocamera. Keep away from constant rain and humidity. Avoid installing the videocamera in very dusty settings. Do
not drop the videocamera. Avoid impacts. We suggest installing in well ventilated places to prevent overheating. Do not point the videocamera towards
the sun to prevent damaging the sensors. If using a laser device, check that the camera is not in any way exposed to its beam. Avoid installing the
videocamera in places with strong electromagnetic fields. To clean the videocamera and sensor use a damp cloth and possibly a mild detergent. The
videocamera lens can only be cleaned using a cotton stick and ethanol. If the videocamera is not used for prolonged periods, apply the lens cover.
The data and information in this manual may be changed at any time and without notice.
→ MOTION VIEW: to view whether there is any movement → DEFAULT