Concept KS3007 Bedienungsanleitung Seite 19

epaired by an authorised service centre.
cleaned by children 8 years of age and older if they are properly supervised. Keep this appliance and the power cord out
utdoors. of reach of children younger than 8 years of age.
for household use only, not for commercial use.
Failure to follow the manufacturer's instructions may cause refusal of warranty repair.
e with wet hands.
EN
pply cable, mains socket plug or the appliance in water or other liquids.
d in any means of transport.
yourself. Contact an authorised service centre.
d by children 8 years of age and older and by persons with physical or mental impairments or
f they are properly supervised or have been informed about how to use of the product in
PRODUCT DESCRIPTION
and the potential dangers. Children must not play with the appliance. This appliance may be
1. Air outlet grille
of age and older if they are properly supervised. Keep this appliance and the power cord out
2. Carrying handle
r than 8 years of age.
3. Thermostat regulator
4. Mode selector
acturer's instructions may cause refusal of warranty repair.
5. Ventilator switch
6. Air inlet grille
7. Legs (according to assembly type) 7. Legs (according to assembly type)
ION
18
24
bly type) bly type)
36
1
1
7
7
EN
ASSEMBLY
The unit must not be used without properly installed legs.
a) Usage as a free-standing appliance
Before you start using the unit, attach the legs which increase its stability and enable the air to flow into the inlet grille.
2
1. Place the unit on a stable surface (e.g. table).
2. Attach the legs on the body.
3. Screw the legs firmly into the body (Fig. 1).
4
5
6
3
2
CAUTION
When turning the appliance on for the first time or after a prolonged downtime, it may produce a slight smell. This
smell will vanish after a short time.
KS3007
KS 3007
OPERATING INSTRUCTIONS
4
1. Place the appliance on a stable surface or floor to prevent it from overturning.
2. Uncoil the supply cable completely.
5
3. Connect the power cord plug to the mains socket outlet.
4. Use the mode selector (4) to choose the power output 800, 1200 or 2000 W.
6
5. Use the thermostat regulator (3) to adjust the required room temperature. When 800, 1200 or 2000 W
power outputs are selected, the unit will alternately switch on and off, thus keeping the required temperature.
You can activate a fan with a switch (5) to rapidly reach the required room temperature.
Note: You can set a more accurate temperature in the following way:
3
Set the thermostat to a maximum value, then switch the unit to the heating mode (800, 1200 or 2000 W).
When the required room temperature is reached, turn the thermostat (3) slowly to a lower temperature until
the unit switches off.
6. After use, switch off the unit and unplug it from the mains outlet.
CLEANING AND MAINTENANCE
Warning!
Always disconnect the power supply cable from the mains outlet before cleaning the appliance.
Make sure the appliance has cooled down before handling it.
KS3007
KS 3007
Only use a wet cloth for cleaning the surface; never use detergents or hard objects, as they may damage it.
KS3007
KS3007 KS3007
KS 3007
Fig. 1
EN
EN
19
37
25