Conceptronic CLLMTRAVBT Schnellinstallationsanleitung Seite 12

ENGLISH
4. Create a Bluetooth Connection
To create a connection between the Bluetooth Travel Mouse and your
computer/notebook, your computer/notebook must be equipped with
Bluetooth.
There are several Bluetooth software stacks available. For a detailed
installation procedure of the Bluetooth software stacks below, see the
User Manual on the delivered Product CD-ROM.
The following Bluetooth software stacks are described in the User Manual
on the CD-ROM:
- Windows Bluetooth software stack (Windows XP SP2 and Vista)
- Widcomm Bluetooth software stack
- IVT Bluesoleil Bluetooth software stack
- Toshiba Bluetooth software stack
Basic Pairing Instructions:
A. Turn on the Bluetooth mouse with the power switch at the bottom.
B. Press the "Pairing" button at the bottom of the Bluetooth mouse.
The LED behind the scroll wheel will blink red.
C. Use your Bluetooth software stack to search for the Bluetooth mouse.
It will be shown as "Bluetooth Mouse" on your screen.
D. Select the "Bluetooth Mouse" on your screen to establish a
connection with the Bluetooth mouse.
Note: No Pin-Code is required to pair with the Bluetooth mouse.
When the pairing is succeeded, the Bluetooth mouse is ready to use.
Note: When you turn on your Bluetooth mouse, it will establish a
connection with your computer automatically.
12