Technical Specifications - Denon PROFESSIONAL DN-900R Schnellstartanleitung

Appendix (English)

Technical Specifications

Inputs
Balanced Analog In L/R
Unbalanced Analog In L/R
Unbalanced Digital In
Balanced Digital In
Dante Digital In
Outputs
Balanced Analog Out L/R
Unbalanced Analog Out L/R
Balanced Digital Out
Unbalanced Digital Out
Dante Digital Out
Dante Network Audio
70
Mic/Line In (2 XLR connectors), Line In (2 RCA connectors), Digital In
(1 AES/EBU,1 S/PDIF), Dante Digital In (RJ-45 connector)
Type: XLR (1:GND, 2:Hot, 3:Cold)
Line setting input level: +4 dBu
Maximum input level: +24 dBu/+20 dBu/+18 dBu
Input impedance: 20 kΩ
Mic setting input level: -60 to 16 dBu
Input impedance: 5 kΩ
EIN: Less than -127 dBu (Rs= 150 Ω)
CMRR: <80 dB
Type: RCA terminal
Input level: -10 dBV
Maximum input level: +10 dBV/+6 dBV/4 dBV
Input impedance: 10 kΩ
Type: RCA terminal
Input impedance: 75 Ω
Standard input level: 0.5 Vp-p
Format IEC-60958 (Coaxial)
Type: XLR (1:GND, 2:Hot, 3:Cold)
Input impedance: 110 Ω
Standard input level: 3.5 Vp-p
Format: IEC-60958 (AES/EBU)
Type: 10/100 Ethernet RJ-45 connector
Format: 24 bit; 96, 48, 44.1 kHz sampling rates, uncompressed
Balanced Analog Out L/R (XLR), Unbalanced Out L/R (RCA), Balanced Digital Out
(AES/EBU), Unbalanced Digital Out (S/PDIF), Headphone Output (1/4" / 6.35 mm),
Dante Digital Out (RJ-45 connector)
Type: XLR (1:GND, 2:Hot, 3:Cold)
Load impedance: Over 600 Ω
Output level: +4 dBu at 600 Ω load
Maximum output level: +24 dBu/+20 dBu/+18 dBu
Type: RCA terminal
Load impedance: Over 10 kΩ
Output level: -10 dBV
Maximum output level: +10 dBV/+6 dBV/+4 dBV
Type: XLR (1:GND, 2:Hot, 3:Cold)
Output impedance: 110 Ω
Standard output level: 3.0 Vp-p
Format: IEC-60958 (AES/EBU)
Type: RCA terminal
Output impedance: 75 Ω
Standard output level: 0.5 Vp-p
Format: IEC-60958 (Coaxial)
Type: 10/100 Ethernet RJ-45 connector
Format: 24 bit, 96, 48, 44.1 kHz sampling, uncompressed
Latency: Less than 1 ms (excluding auxiliary signal paths)
Sample rate: DN-900R uses SRC on its output to Dante to convert
recorder sample rate to Dante Network sample rate.
Sample bit depth: 24 bit