Gewiss CHORUS GW 10 716 Installationsanweisung Seite 26

• Thank you for selecting this Gewiss product.
Gewiss products have been designed with attention to detail and built using only the
very best materials.
Gewiss products will guarantee excellent and lasting performance.
• The installer is kindly requested to fill out this leaflet and then hand it to the end user,
asking that he/she carefully read it.
• Carefully read the instructions below as they provide important information on how the
water detector works, how it should be fitted and serviced (routine and extraordinary
maintenance).
• The manufacturer may not be held liable for injury to persons or pets or damage caused
by the use of the water detector in situations and conditions other than those indicated
in the instructions below.
• The manufacturer may not be held liable in the case that the detector is sold in non-
original packaging.
Immediately after removing the product from its packaging, make sure that it is not
damaged.
• Make sure that the main power supply has been switched off before attempting to fit
the device or touching the wiring.
• Before connecting the detector, make sure that the data on its ratings plate match the
mains supply.
• Connect the detector as indicated in the drawings on page 33.
• All Chorus products must be fitted in compliance with CEI 64-8 standards for domestic
appliances and similar devices, in dust-free areas and where there is no need for special
water-proofing protection.
• Always contact an authorised technician or Gewiss's own customer service ("SAT") if
the detector is faulty and/or malfunctions and in the case of extraordinary maintenance
and scrapping.
Attention - Important
26