Worthy Information - Lacor 200 Serie Gebrauchs- Und Instandhaltungsanleitung

Warranty Information
This manual provides the installation, safety and operating instructions for the BRISK blender.
We recommend all installation, operating and safety instructions appearing in this
manual to be read before installation or operation.
BRISK blender is a product of extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance and optimum performance. Every unit is
thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug BRISK blender into a properly grounded electrical
outlet of the correct voltage, size, and plug configuration. If
the plug and receptacle do not match, contact a qualified
electrician to determine the proper voltage and size, and
install the proper electrical outlet.
2.- In the event of poor operation or a strange noise or smell,
unplug the unit from the electrical power supply and allow it
to cool before performing any maintenance tasks.
3.- Avoid unnecessary risks, never touch or change the blades
without first unplugging the power cable from the outlet.
The rotating blades may cause significant amputations.
4.- Never allow it to operate while empty, as this may
permanently damage the internal elements of the blender
chopper.
5.- To prevent any injury or damage do not pull unit by power
cord.
6.- To prevent any injury, discontinue use if power cord is frayed
or worn.
44

WORTHY INFORMATION

Keep these instructions for future reference.
WARNING
!