GB
ceiling mount
Push the infrared heater in from the side as shown in the sketch below. Hold the panel carefully in position until it is
compeletely fixed (for the bigger panels it will be necessary to work with 2 persons!)
Turn the holders for 90° /-90° or for 180° / -180° as shown in the sketch below. This will lock the panel in position.
Use a suitable wrench to fix the screws on the wall / ceiling and on the panel.
Now it should not be possible to remove the panel without using tools!
Don't use different screws on the heater as the delivered ones. Longer screws will damage the heating element inside!
Note that the delivered dowels and screws are not suitable for all wall- or ceiling types. Please consult a specialized
dealer for dowels and screws if you are in doubt!
15