Display Description; Battery Replacement - V2 PROTEO12-D Bedienungsanleitung

DISPLAY description

Blinks when the remote is transmitting
Blinks when the battery requires
replacement
Indicates that there are scheduled
events
Opening event
Intermediate position event
Closing event
SUN ON event
SUN OFF event
AUTO mode active
MANUAL mode active
Days of the week
Su = Sunday
Mo = Monday
Tu = Tuesday
We = Wednesday
Th = Thursday
Fr = Friday
Sa = Saturday
These digits are used to display the time
Events scheduling
Day and time setting
Active schedule
Radio channels

Battery replacement

When the battery low indication turns on
proceed as soon as possible to replace the battery; in this situation
there is a significant risk that the controls can not be sent
properly.
Open the battery compartment and replace the battery matching
the polarity indicated in the figure.
NOTE: If the device is in ENERGY SAVING mode (display off) and
batteries are replaced in less than 30 seconds, the time and date
settings are retained.
If they get lost, the device turns on automatically starting the
menu "Clock Setting"
WARNING: Batteries contain pollutant elements, must be
disposed of in accordance with environmental regulations
(V2 advise to use a specific disposal system).Transmitter contains
pollutant elements too; follow the same procedure to dispose.
Should the batteries lose electrolytic substances, please replace
them immediately avoiding with care any contact with such
substances.
15
, it is necessary to