Jydepejsen cosmo Befeuerungsanleitung Seite 15

3. Warranty
Brand-new wood-burning stoves from Jydepejsen A/S come with a 5-year warranty. The warranty includes defects
and burn-through with correct operation.
Any claims during the warranty period should be directed to the dealer who sold the stove. All stoves from Jydepe-
jsen come with their own individual serial number on the type plate on the back of the stove. Please quote stove
model and serial number to your dealer in connection with service tasks.
In the event of warranty repairs, a signed and dated invoice must also be produced, showing the dealer's name.
The warranty does not cover dismantling, transport and reassembly of your stove.
No compensation will be granted for:
- Damage during transport
- Damage to other articles resulting from use of the stove
- Damage arising from misoperation or incorrect usage, such as overheating – avoid this by reading the operat-
ing instructions carefully
- The directions in the operating instructions have not been followed.
The stove is supplied with wearing parts, which are to be replaced due to usage of the stove. These parts are not
covered by the warranty – how often they are to be replaced is individual and depends on the stove usage. The
wearing parts are: Vermiculite panels - baffle plates - sealing band.
Furthermore, Glass, ceramic tiles and soapstone are not covered by the warranty. If any of the above mentioned
need replacing, new parts can be ordered from your dealer.
4. Stoking instructions
It is very important to ensure that your chimney has a decent draught. The Alpha and Omega is the cooperation
between the chimney and the stove. Your dealer or your chimney sweep will be able to guide and advice you on your
chimney conditions.
When this is settled, the next step is that you make the stove and the chimney cooperate. This is done by following
the operating instructions and using fuel which inflames easily in the combustion chamber, until a decent draught
is obtained. For further information on correct lighting and stoking, please refer to Jydepejsen´s „Manual for instal-
lation and stoking".
Please note that the stove paint will harden during the first few initial lightings. This means that the stove will gene-
rate smoke and an odour of paint, which will dissipate after about 1 hours´s operation. It is a good idea to ensure
effective ventilation during this phase. Also, touching the stove should be avoided, since this may cause the paint to
scale.
The stove will expand and contract during the lighting and cooling phase, possibly resulting in creaking noises. This
phenomenon is completely normal for sheet-iron stoves, and cannot be regarded as a fault.