Assembly Drawing - zopa IVOLIA B-5060 Gebrauchsanleitung

INSTRUCTIONS FOR CLEANING AND MAINTENANCE
Chair can clean and maintain only by adult.
The cover can be cleaned with a damp towel or neutral detergent.
Plastic parts regularly clean with a damp towel.
Never wash the lectern in the dishwasher. Do not use quicksand or thinners. If the metal parts come into
contact with water, wipe dry to prevent rusting.
Chair store in a dry place. Regularly remove dust, dirt and sand from all the plastic parts that move along
the skeleton chairs. To reduce friction, which could reduce the correct functionality of the product.

ASSEMBLY DRAWING

L
A B
Step 1: Insert left and right foot tube (L, R) into chair body separately according to arrow direction.
Step 2: Insert front and rear foot tube (A, B) into foot tube support (A: front foot tube. B: rear foot tube).
WARNING
Make sure the shrapnel of the foot tube is completely locked tube support before next operation. According
to chair safety test. Make sure fixed and non-slip foot tube A is installed at the front of chair. And foot tube B
which with wheels are installed at rear.
fold button
① ①
L
R
B
A
②
②
20
R
Opening ways
of Chair stand
Press the button on both sides,
open front and rear tube to
maximum 1.
Loose the button,Try to fold
two foot tubes and confirm
they are locked.
Then pull the chair upward to
highest position 2. Make sure
the whole chair is in stable
state.