Audio Recording - Wiseup CHC200 Benutzerhandbuch

standby mode.
[Note]:
A video file will be generated and saved every 3 minutes automatically.

3.4. AUDIO RECORDING

3.4.1. Power on the camera by pressing Power Button for two seconds. The indica-
tor light will be solid red, indicating the camera has entered into standby mode auto-
matically.
3.4.2. Press Audio Recording Button once to record audio. The indicator light will
flash red twice and then turn off.
3.4.3. Press Audio Recording Button once again to stop recording audio. The indica-
tor light will be solid red, indicating the camera is back to standby mode.
[Note]:
An audio file will be generated and saved every 1 hour automatically.
WAV
IV. Video/Audio File Uploads
4.1. When the phone charger camera is powered off, remove the Micro SD card and
insert it into a card reader.
4.2. Insert the card reader into a PC computer.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the "DCIM" folder.
V. Setting Time/Date Stamp
5.1. When the phone charger camera is powered off, remove the Micro SD card and
insert it into a card reader.
5.2. Insert the card reader into a PC computer.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create a file
named "time.txt".
5.5. Write the current date and time in the "time.txt" file with the correct format:
YYYY.MM.DD HH:MM:SS (For example: 2016.04.12 14:24:32). Save this file.
5.6. Restart the camera and the system will upgrade the program automatically.
Audio Format: