Power On/Off; Video Recording - Wiseup CHC200 Benutzerhandbuch

SDHC Class 10 Micro SD card is recommended.
>> Connect the camera to an outlet AC power socket by using the USB cable and
DC 5V charging adapter provided.
[Note]:
If no Micro SD card is fitted into the camera, the indicator light will not respond properly to
your operation.

3.1. POWER ON/OFF

3.1. Power on the camera by pressing Power Button for two seconds. The indicator
light will be solid red, indicating the camera has entered into standby mode automat-
ically.
3.2. Power off the camera by pressing Power Button for two seconds again. The
indicator light will flash red and blue four times and then turn off.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing Power Button for two seconds. The indica-
tor light will be solid red, indicating the camera has entered into standby mode auto-
matically.
3.2.2. Press Video Recording Button once to record video. The indicator light will
flash red twice slowly and then turn off.
3.2.3. Press Video Recording Button once again to stop recording video. The indica-
tor light will be solid red, indicating the camera is back to standby mode.
[Notes]:
1). A video file will be generated and saved every 10 minutes automatically.
2). Video Resolution: 1280×720P Video Format: AVI
3). Loop recording is supported.
3.3. MOTION DETECTION VIDEO RECORDING
3.3.1. Power on the camera by pressing Power Button for two seconds. The indica-
tor light will be solid red, indicating the camera has entered into standby mode auto-
matically.
3.3.2. Press Motion Detection Recording Button once to enter into motion detection
recording mode. The indicator light will flash blue twice and then turn off.
3.3.3. When a movement is detected, the indicator light will flash blue once and the
camera will start recording video automatically.
3.3.4. Press Motion Detection Recording Button once again to exit motion detection
recording mode. The indicator light will be solid red, indicating the camera is back to