INSTALLATION
Connection
Connect it to the PC using the USB cable supplied.
Cavo USB
Warnings for installation phase
The device must be used for fixed installations in closed environments, dry areas, in
flush-mounted cases (in the case where the programmer is removed from the table
dashboard).
The programmer device cannot be installed inside the same box (wall or flush-mounted)
together with 230 V devices.
Only qualified personnel are permitted to install and start up the access monitoring system.
Always comply with the safety and accident prevention standards and regulations in force.
The programmer device must not be opened. If it is not working properly, contact an
authorised technician or contact the GEWISS Customer Care service for assistance.
14