OPERATING INSTRUCTIONS
Description of the product and how it works
The Transponder Programmer is a coding device for Transponder badges (code GW10684)
to be used with the devices below:
- GW 10 / 12 /14 681 transponder reader unit
- GW 10 / 12 /14 682 transponder holder unit
to monitor the access of clients or staff to hotel rooms, offices, hospital wards, swimming
pools, saunas, sporting facilities, restricted areas, car parks etc.
The Programmer must be connected to the PC on which the the specific software (GW
HOTEL or GW ACCESS) will be installed and used to create and manage the data to be
written and/or read on the Transponder badges;
The device is supplied with a USB cable to connect it to the PC (check that the PC is able
to supply a minimum of 250 mA on the USB port).
The reading/writing of the transponder badges is performed when they are inserted into the
slot on the front.
The transponder reader is fitted inside a table dashboard, complete with a Chorus ONE 4
position plaque.
12